Allied Telesis RAPIER I Show qos policy, QoS Enhancements Release Note Parameter Description

136	QoS Enhancements			Release Note
		Parameter (cont.)	Description (cont.)
		STORMAction	Action QoS takes when a storm is detected on a port.
			Default: portdisable
			LINKDown	Operationally disables ports to which the traffic class
				is attached.
			POrtdisable	Administratively disables ports to which the traffic
				class is attached.
			VLANdisable	Administratively disables ports to which the traffic
				class is attached for the VLAN on which the classifier
				is matching.
		STORMTimeout	Length of time the port remains disabled after a storm is detected.
			Default: none
			timeoutlength	Duration in seconds from 1 to 86400.
			NONE	The port remains disabled until you enable it again
				with the enable switch port or enable switch
				port vlan command in the Switching chapter.
		Table 31: Parameters in output of the show qos trafficclass=18 command
		Parameter	Meaning
		Status	Whether storm protection is enabled for the default traffic class.
		Action	Whether the port is administratively or operationally disabled
			when the volume of traffic exceeds the rate.
		Rate	Allowable traffic volume before action is executed.
		Window	Interval in milliseconds between checking the traffic class for
			storms.
		Timeout	Length of time in seconds that the port remains disabled when it
			is disabled by storm protection.

show qos policy

Syntax SHow QOS POLIcy[={idALL}]

This command displays information about QoS policies and now includes information about port groups assigned to them.

Software Version 2.8.1 C613-10477-00 REV B