Allied Telesis RAPIER I manual Delete ppp acservice, Set ppp acservice, PPPoE Access Concentrator

Models: AT-9900 AT-8700XL AT-9800 AT-8600 RAPIER I AT-8800 AT-8900 X900-48FE

1 232
Download 232 pages 5.78 Kb
Page 48
Image 48

48

PPPoE Access Concentrator

Release Note

delete ppp acservice

Syntax DELete PPP ACservice=service-name

[ACINTerface={NONEinterface}]

where:

interface is an interface name formed by concatenating an interface type and an interface instance (e.g. eth0). Valid interface types are ETH and VLAN.

Description This command deletes a PPP over Ethernet Access Concentrator service from the router or switch. Note that it is not possible to delete a service that is currently in use.

The acinterface parameter specifies the interface on which the service is offered. This parameter is used to further identify the service to delete, as it is possible to have two or more services with the same name, but which are offered on different interfaces:

If you specify an interface, it is on that interface that the service with the specified name is deleted.

If you specify none, the service offered on the Ethernet port is deleted if it was added with acinterface=none specified in the add ppp acservice command.

If multiple interfaces exist for the service, you are prompted to specify an acinterface. The default is none.

The acinterface parameter supercedes the now deprecated vlan parameter in this command.

set ppp acservice

Syntax SET PPP ACservice=service-name[ACRadius={OFFON}] [MAXSessions=1...512] [TEMPlate=ppp-template]

[ACINTerface={NONEinterface}]

Where:

interface is an interface name formed by concatenating an interface type and an interface instance (e.g. eth0). Valid interface types are ETH and VLAN.

Description This command sets the parameters associated with the specified PPPoE Access Concentrator service.

The acinterface parameter specifies the interface on which the service is offered. This parameter further identifies the service whose parameters are to be changed, as it is possible to have two or more services with the same name but offered on different interfaces. It is not possible to change the interface on which the service is offered.

If an interface is specified, the service with the specified name on that interface has its parameters changed.

If none is specified, the service offered on the Ethernet ports has its parameters changed.

Software Version 2.8.1 C613-10477-00 REV B

Page 48
Image 48
Allied Telesis RAPIER I, X900-48FE, AT-8900, AT-8700XL Delete ppp acservice, Set ppp acservice, PPPoE Access Concentrator