Allied Telesis AT-8800, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900 manual Configuring vlansecure

Software Version 2.8.1 31

Default behaviour		Securing only the VLAN
(vlansecure enabled)		(vlansecure disabled)
port 15	port 16	port 15	port 16
vlan2		vlan2
vlan1		vlan1
			swi-filter

Configuring vlansecure

To turn off the default behaviour, so that the filter prevents access to only the current VLAN when you move the host, use the new command:

disable switch filter vlansecure

To return to the standard filter behaviour, use the new command:

enable switch filter vlansecure

To display which mode the filtering behaviour is in, use the existing command:

show switch filter

This command now displays the additional field VlanSecure, which is either

DISABLED or ENABLED.

Command Changes

The following table summarises the new and modified commands:

CommandChange

disable switch filter vlansecure	New command
enable switch filter vlansecure	New command
show switch filter	New VlanSecure field

Software Version 2.8.1 C613-10477-00 REV B