Allied Telesis AT-9800 manual Restart Log, Trap on Login Failures, VLAN-based port state changes

190 SNMP MIBs Release Note

from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. The trap contains the following objects:

•mstpXstId, the MSTI or CIST instance

•mstpXstPortIndex, the index of the port in the mstpPortTable table

•mstpXstPortState, the new state of the port

Restart Log

The sysinfo Group of the Allied Telesis Enterprise MIB has the object identifier prefix sysinfo ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4) atRouter(4) 3 }), and contains objects that describe generic system information.

This software version defines the following new object in the sysinfo Group:

■restartLog ({ sysinfo 11 }) contains the log messages of type REST/001 generated during the last restart.

Trap on Login Failures

The TTY Group of the Allied Telesis Enterprise MIB has the object identifier prefix tty ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) 36 }), and contains objects and a trap for monitoring login failures.

This software version defines the following new objects and trap in the ttyTraps ({ tty 100 }) subtree:

■loginFailureUser ({ ttyTraps 1 }) is the username that generated the login failure.

■loginFailureIPAddress ({ ttyTraps 2 }) is the IP address the failed login attempt originated from.

■loginFailureAttempts ({ ttyTraps 3 }) is the number of failed login attempts.

■The loginFailureTrap trap ({ ttyTraps 11 }) is generated when a user is locked out because the number of consecutive failed login attempts exceeded the maximum allowed, and contains the following objects:

•loginFailureUser

•loginFailureIPAddress

•loginFailureAttempts

VLAN-based port state changes

The Switch Group of the Allied Telesis Enterprise MIB has the object identifier prefix swi ({ enterprises(1) alliedTelesyn(207) mibObject(8) brouterMib(4) atRouter(4) modules(4) 87 }), and objects that describe switch ports.

This software version defines the following new objects and trap in the Switch

Group:

■swiPortVlanTable ({ swi 4 }) is a table of port/VLAN mappings, indexed by swiPortVlanPortNumber and swiPortVlanVlanId. It contains the following objects:

• swiPortVlanPortNumber, the index of a port on the router or switch.

Software Version 2.8.1 C613-10477-00 REV B