Allied Telesis AT-8600 Show qos trafficclass, Number of bytes that conforms with band with class

Software Version 2.8.1		141
	Table 34: Parameters in output of the show qos portgroup counters trafficclass
	command
	Parameter	Meaning
	Port Group	Port group ID.
	Policy	Policy attached to the port group.
	Traffic Class	Counters for this traffic class.
	Aggregate Bytes	Total number of bytes this traffic class counted.
	BwConformanceClass1 bytes	Number of bytes that conforms with band with class 1.
	BwConformanceClass2 bytes	Number of bytes that conforms with band with class 2.
	BwConformanceClass3 bytes	Number of bytes that conforms with band with class 3.
	Dropped bytes	Number of bytes this traffic class discarded.

Example To display all configured port groups, use the command:

sh qos portg=all

show qos trafficclass

Syntax SHow QOS TRafficclass[={idALL}]

Figure 43: Example output from the show qos trafficclass=18 command
Identifier	18
Description	Interactive Voice
Policy Assigned to	1
Flow Groups	8-11
Drop BandwidthClass3	YES
Ignore BandwidthClass ..... YES
Maximum Bandwidth	10Mbps
Maximum Burst Size	64kbyte
Minimum Bandwidth	None
Minimum Burst Size	None
Premarking	USEMARKVALUE
Remarking	USEDSCPMAP
Mark Value	0
Action	SENDVLANPORT
VLAN	2
Port	4
Storm Protection:
Status	ENABLED
Action	PORTDISABLE
Rate	1kbps
Window	100ms
Timeout	None

Software Version 2.8.1 C613-10477-00 REV B