Allied Telesis AT-9900, RAPIER I, X900-48FE, AT-8900, AT-8700XL Enable ssh debug, Enable ssh server

148 Secure Copy (SCP) Release Note

enable ssh debug

Syntax ENAble SSH DEBug={SSHSCPALL}

Description This new command enables the SSH server debugging facility. If ssh is specified, debugging is turned on for Secure Shell. If scp is specified, debugging is turned on for Secure Copy. If all is specified, debugging for both SSH and SCP is turned on. Debugging is disabled by default.

Example To enable debugging of SCP, use the command:

ena ssh deb=scp

enable ssh server

Syntax ENAble SSH SERver HOSTKey=key-idSERVERKey=key-id[EXPirytime=0..168] [LOGintimeout=1..600]

[SCP={ENAbledDISabled}]

Description This command enables the Secure Shell server. The new scp parameter allows you to enable or disable Secure Copy service for the Secure Shell.

Parameter	Description
SCP	Whether the SSH server supports SCP connections.
	Default: enabled
	ENAbled	Allows SCP connections
	DISabled	Does not allow SCP connections

Software Version 2.8.1 C613-10477-00 REV B