Allied Telesis AT-8700XL, RAPIER I manual STP Enhancement, Show stp port, New Port field in output

Software Version 2.8.1 51

STP Enhancement

You can now display the RSTP states for one or more ports by using the existing command:

show stp port={port-listall} rstpstate

The information for each port now starts with the port number. This makes the output more readable.

Command Changes

The following table summarises the modified command:

CommandChange

show stp port New Port field in output

Command Reference Updates

This section describes the changed portions of modified commands and output screens. For modified commands and output, the new parameters, options, and fields are shown in bold.

show stp port

Syntax SHow STP[={stp-nameALL}] POrt={port-listALL} RSTPstate

Description The output of this command includes a new field.

Figure 12: Example output from the show stp port rstpstate command

RSTP	State Information
---------------------------------------------------------------------------
STP	Name: default
Bridge Level State Machine			............ STATE
	Port Role Selection		Role Selection
Port			1
	Port State Machines		STATE
	Port Information		Disabled
	Port Role Transitions		Blocked Port
	Port State Transition		Discarding
	Topology Change		Inactive
	Port Protocol Migration		Init
	Port Transmit		Idle
Port			2
	Port State Machines		STATE
	Port Information		Disabled
	Port Role Transitions		Blocked Port
	Port State Transition		Discarding
	Topology Change		Inactive
	Port Protocol Migration		Init
	Port Transmit		Idle
.
.
.
		Table 11: New parameters in the output of the show stp port rstpstate command
		Parameter	Meaning
		Port	The number of the port for which state information is displayed.

Software Version 2.8.1 C613-10477-00 REV B