Allied Telesis AT-8700XL, RAPIER I, X900-48FE, AT-8900, AT-9900 manual Logging Snmp operation, Usage

Software Version 2.8.1 187

■The Segment Endpoint 1-Day Interval Status/Performance Group contains objects that describe the historic status and performance of segment endpoints in 1-day intervals.

■The Maintenance Group contains objects for performing maintenance operations such as loopbacks for SHDSL lines.

■The Span Configuration Profile Group contains objects that define configuration profiles for SHDSL Spans.

■The Segment Endpoint Alarm Configuration Profile group contains objects that define alarm configuration profiles for SHDSL segment endpoints.

■The Notifications Group contains traps for error conditions on SHDSL lines.

■The Conformance Group contains objects that describe compliance statements and mandatory object groups.

This software version adds support for STU-C and STU-R mode operation on the AR442S SHDSL router, and implements all groups in the SHDSL MIB. However, the implementation of some objects differs from RFC 3276. In particular, the following objects defined with read-write access are implemented as read-only:

Object Name	Object ID
hdsl2ShdslSpanConfNumRepeaters	{ 1.3.6.1.2.1.10.48.1.1.1.1 }
hdsl2ShdslSpanConfProfile	{ 1.3.6.1.2.1.10.48.1.1.1.2 }
hdsl2ShdslSpanConfAlarmProfile	{ 1.3.6.1.2.1.10.48.1.1.1.3 }
hdsl2ShdslEndpointAlarmConfProfile	{ 1.3.6.1.2.1.10.48.1.4.1.3 }
hdsl2ShdslMaintLoopbackConfig	{ 1.3.6.1.2.1.10.48.1.8.1.1 }
hdsl2ShdslMaintPowerBackOff	{ 1.3.6.1.2.1.10.48.1.8.1.3 }
hdsl2ShdslMaintSoftRestart	{ 1.3.6.1.2.1.10.48.1.8.1.4 }
hdsl2ShdslMaintLoopbackTimeout	{ 1.3.6.1.2.1.10.48.1.9.1.1 }

Logging SNMP operation

The SNMP agent now generates the following log message when there is insufficient system memory to process a get or set request:

Message	SNMP request not processed due to excessive memory
	usage
Severity	5 / IMPORTANT
Module	59 / SNMP
Log Type	089	/ SNMP
Log Subtype	001	/ MEMORY
Recommended	Use the show buffer command to check system memory usage. Use
Action	the show snmp command to check for excessive polling.

Software Version 2.8.1 C613-10477-00 REV B