Manuals / Allied Telesis / Computer Equipment / Network Router

Allied Telesis AT-8800, RAPIER I, X900-48FE, AT-8900 Show bgp peer, Show bgp route, Routes learned

Models: AT-9900 AT-8700XL AT-9800 AT-8600 RAPIER I AT-8800 AT-8900 X900-48FE

1 232
Download 232 pages 5.78 Kb
Page 111
Image 111

Software Version 2.8.1

111

show bgp peer

Syntax SHow BGP PEer[=ipadd]

Description When you specify a peer, the output of this command includes a new field.

Figure 30: Example output of the show bgp peer command for a specific peer

Peer

192.168.10.1

Description

-

State

Idle

Policy Template

4

Description

Test Template 1

Private AS filter ...

Yes

Remote AS

3

BGP Identifier

172.20.25.2

Routes learned

15

Authentication

None

Password

-

 

.

 

 

.

 

 

.

 

 

 

 

 

Table 28: New parameters in the output of the show bgp peer command

Parameter

Meaning

 

 

Routes learned

The number of routes that the router or switch has learned from this

 

peer.

 

 

show bgp route

Syntax SHow BGP ROUte[=prefix]

[COMmunity={INTernetNOAdvertiseNOExport

NOEXPORTSubconfedaa:xx}[,...]}] [PEer=ipadd]

[REGexp=aspathregexp]

Description The new peer parameter specifies the IP address of the peer. If you specify a peer, the router or switch only displays routes that it learned from that peer. If you specify the router or switch’s router ID, it displays all locally originated routes. The peer parameter has no default.

Note that this enhancement did not change any fields in the output of the show bgp route command; it simply provides another method of filtering the displayed routes.

Software Version 2.8.1 C613-10477-00 REV B

Page 110 Page 112
Page 111
Image 111
Allied Telesis AT-8800, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900, AT-8600 Show bgp peer, Show bgp route, Routes learned
Page 110 Page 112