Allied Telesis AT-9800, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900 Show ip filter, Show ip udp

78 Internet Protocol (IP) Enhancements Release Note

show ip filter

Syntax SHow IP FILter[= 0..999]

Figure 20: New parameters in example output from the show ip filter command

IP Filters

--------------------------------------------------------------------------------

No. Filter Type
Ent. Source Port	Source Address	Source Mask	Session	Size
Dest. Port	Dest. Address	Dest. Mask	Prot.(C/T)	Options
Pattern Type	Act/Pol/Pri		Logging	Matches

--------------------------------------------------------------------------------

2 Traffic
1	Any	192.168.166.2	255.255.255.255	Any	Yes
	Any	192.168.163.39	255.255.255.255	Any	No
	General	Include		Off	0
2	Any	192.168.163.21	255.255.255.255	Any	Yes
	23	192.168.163.39	255.255.255.255	TCP	No
	General	Exclude		Off	0
Requests: 0 Passes:		0 Fails: 0

--------------------------------------------------------------------------------

Table 18: New parameters in output of the show ip filter command

Parameter	Meaning
Filter Type	The filter type of the pattern; one of “Traffic”, “Policy“, “Priority”, or
	“Routing“.
Pattern Type	Whether the pattern type is general or specific.

show ip udp

Syntax SHow IP UDP

Description The output of this command now includes a new “Process” field, and has different information in the “Local address” field (Figure 21, Table 19).

Figure 21: Updated example output of the show ip udp command

Local port Local address Remote port Process

------------------------------------------------------------

1698	1.1.3.1	4660	RSVP
5023	0.0.0.0	5023	SRLP LOG
5024	0.0.0.0	5024	NETM LOG
1701	3.3.3.2	0	L2TP
520	1.1.2.2	0	RIP
514	0.0.0.0	514	SYSLOG

------------------------------------------------------------

Software Version 2.8.1 C613-10477-00 REV B