Allied Telesis AT-8600, RAPIER I, X900-48FE, AT-8900 Upload, Software Version 157, Characters long

Software Version 2.8.1 157

upload

Syntax UPLoad [METhod=SCP] [DESTFile=destfilename]

[FIle=filename] [{KEYid=key-idPASSword=password}] [SErver={hostnameipaddipv6add}] [USERName=username]

Description The new scp parameter allows you to upload a file using Secure Copy.

Parameter	Description
METhod	The method used to upload the file. When scp is specified, Secure
	Copy is used.
	Default: tftp or the method set in the set loader command
KEYid	The ID number of a RSA private or public key that is held on the router
	or switch. The server receiving the upload request must have the public
	key for this authentication to work. The key-idis a decimal number
	from 0 to 65535.
	Default: no default
PASSword	The password for server authentication, if RSA authentication is not
	being used. This can be between 1 to 60 characters long. When you
	type the password it appears as plain text on the screen, so it should
	only be used in a secure area.
	Default: no default
USERName	The username for server authentication. This can be between 1 to 60
	characters long.
	Default: no default

Example To upload the file debug.txt to a SCP server with the IP address 172.16.8.5, use the command:

upl met=scp fi=debug.txt destf=/tmp/debug.txt se=172.16.8.5 usern=john password=secret

Software Version 2.8.1 C613-10477-00 REV B