Allied Telesis AT-9800, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900, AT-8600 Parameter Meaning

14	System Enhancements		Release Note
		Table 1: New parameters in output of the show cpu=extended command
		Parameter	Meaning
		State	Whether extended CPU utilisation is enabled.
		Current Time	Current time in hh:mm:ss format. The time in
			milliseconds since midnight, and the current timestamp
			are also in brackets.
		Current Install	Current installed release, with the size of the release in
			brackets.
		Start percent	Percentage of utilisation that the CPU must reach, if any,
			before the router or switch can begin capturing
			extended CPU utilisation data. A “-” shows if no
			percentage is set.
		Stop percent	Percentage of utilisation that the CPU must fall below
			before the router or switch stops capturing extended
			CPU utilisation data.
		msSM	Time when the router or switch captured the CPU
			utilisation sample. The time format is milliseconds since
			midnight, in hexadecimal notation.
		Timestamp	Time when the router or switch captured the CPU
			utilisation sample. The time format is microseconds
			since the router or switch last restarted. This figure
			wraps at 4 294 967 295 to return to 0.
		Util	Percentage of instantaneous CPU utilisation.
		Caller	Return address of the function that the CPU is
			executing.
		Return 1, Return 2, Return 3	Return addresses for function calls on the CPU stack.

Example To display the extended CPU utilisation data, use the command:

sh cpu ext

Software Version 2.8.1 C613-10477-00 REV B