Allied Telesis AT-9900, RAPIER I, X900-48FE, AT-8900, AT-8700XL Introduction, Product series Models

4 Introduction Release Note

Introduction

Allied Telesis announces the release of Software Version 2.8.1 on the products in the following table. This Release Note describes the new features and enhancements.

Product series	Models
x-900-48FE	x-900-48FE, x-900-48FE-N
AT-9900	AT-9924T, AT-9924SP, AT-9924T/4SP
AT-8900	AT-8948
AT-9800	AT-9812T, AT-9816GB
Rapier i	Rapier 24i, Rapier 48i, Rapier 16fi
AT-8800	AT-8824, AT-8848
AT-8700XL	AT-8724XL, AT-8748XL
AT-8600	AT-8624T/2M, AT-8624PoE, AT-8648T/2SP
AR700	AR725, AR745, AR750S, AR770S
AR400	AR415S, AR440S, AR441S, AR442S, AR450S

The product series that each feature and enhancement applies to are shown in “Overview of New Features” on page 6. This Release Note should be read in conjunction with the Installation and Safety Guide or Quick Install Guide, Hardware Reference, and Software Reference for your router or switch. These documents can be found on the Documentation and Tools CD-ROM packaged with your router or switch, or:

www.alliedtelesis.com/support/software

This Release Note has the following structure:

1.Upgrading to Software Version 2.8.1

This section lists the names of the files that may be downloaded from the web site.

2.Overview of New Features

This section lists the new features and shows the product families on which each feature is supported.

3.Descriptions of New Features

These sections describe how to configure each new feature.

Caution: Information in this document is subject to change without notice and does not represent a commitment on the part of Allied Telesis Inc. While every effort has been made to ensure that the information contained within this document and the features and changes described are accurate, Allied Telesis Inc. can not accept any type of liability for errors in, or omissions arising from, the use of this information.

Software Version 2.8.1 C613-10477-00 REV B