Allied Telesis AT-8600, RAPIER I, X900-48FE, AT-8900 manual Command Reference, # For Transit Nodes 2

Ethernet Protection Switching Ring (EPSR) 15

Figure 1-12: Example script for a combined EPSR STP network - Transit Nodes 2 and 4

#For Transit Nodes 2 and 4

#Set the Acceptable Frame Types parameter to admit only VLAN tagged frames on

#ports 1 and 2.

set switch port=1 acc=vlan set switch port=2 acc=vlan

# Create VLANs

create vlan=control_ring vid=2 create vlan=data_ring vid=100

# VLAN Port Configuration

add vlan=control_ring port=1-2 frame=tagged add vlan=data_ring port=1-2 frame=tagged

#Remove the Default VLAN from ports 1-2 del vlan=default po=1-2

#EPSR Configuration

create epsr=domain_one mode=transit controlvlan=control_ring add epsr=domain_one datavlan=data_ring

enable epsr=domain_one

Command Reference

This section describes the commands available to configure and manage the

EPSR functions on the switch.

The shortest valid command is denoted by capital letters in the Syntax section. For more details of the conventions used to describe command syntax, refer to your switch’s Software References.