Allied Telesis X900-48FE Show qos port, Ports Assigned to Port Groups Assigned to 213-24, Action

Software Version 2.8.1	137
Figure 39: Example output of the modified show qos policy command
Identifier	1
Description	all ports
TCs Assigned	5,7,22,31-33
Port(s) Assigned to	1-24

Port Group(s) Assigned to ... 1(1-12)

		2(13-24)
Trunk(s) Assigned to	........	None
Default Traffic Class:
Minimum Bandwidth		None
Minimum Burst Size	........	0 B
Maximum Bandwidth		10 Mbps
Maximum Burst Size	........	64 kbyte
Drop BandwidthClass3		YES
Ignore BandwidthClass ..... YES
Premarking		USEMARKVALUE
Remarking		UESDSCPMAP
Mark value		0
Action		SENDVLANPORT
VLAN		2
PORT		4
Storm Protection:
Status		ENABLED
Action		PORTDISABLE
Rate		1kbps
Window		100ms
Timeout		None
Table 32: New parameters in output of the show qos policy command
Parameter	Meaning
Port Group(s) Assigned to	ID of the port group that is assigned to the policy.
Trunk(s) Assigned to	Trunks to which the policy has been assigned.
Status	Whether storm protection is enabled for the default traffic
	class.
Action	Whether the port is administratively or operationally
	disabled when the volume of traffic exceeds the rate.
Rate	Allowable traffic volume before action is executed.
Window	Interval in milliseconds between checking the traffic class
	for storms.
Timeout	Length of time in seconds that the port remains disabled
	after having been disabled by storm protection.

show qos port

Syntax SHow QOS POrt[={port-listALL}] [EGRessqueue=queue-list]

Description This command displays QoS information about ports and now includes

information about port groups (bold in example below).

Software Version 2.8.1 C613-10477-00 REV B