Allied Telesis AT-8900, RAPIER I, X900-48FE Show epsr, Epsr instance whose details are displayed

28 show epsr Software Reference

show epsr

Syntax SHOW EPSR[={epsr-nameALL}]

Description This command displays information about the specified EPSR instance, or all EPSR instances on the switch (Figure 1-13, Table 1-2).

Parameter	Description
EPSR	The EPSR instance whose details are displayed.
	Default: all
	epsr-name	The name of the EPSR instance. This can be a character
		string, 1 to 15 characters long. Valid characters are
		uppercase letters (A-Z), lowercase letters (a-z), digits (0-9),
		the underscore character ("_"), the hyphen character ("-").
		The epsr-namecannot be ALL.
	ALL	All EPSR instances.

Figure 1-13: Example output from the show epsr command

EPSR Information

--------------------------------------------

Name	blue
Mode	Master
Status	Enabled
State	Complete
Control VLAN	vlan2 (2)
Data VLAN(s)	vlan100 (100)
	vlan101 (101)
	vlan102 (102)
Primary Port	1
Primary Port Status	Forwarding
Secondary Port	2
Secondary Port Status	Blocked
Hello Time	1 s
Failover Time	2 s
Ring Flap Time	0
Trap	Enabled
Name	red
Mode	Transit
Status	Enabled
State	Links-Up
Control VLAN	vlan3 (3)
Data VLAN(s)	vlan103 (103)
First Po rt	1
First Port Status	Forwarding
First Port Direction	Upstream
Second Port	2
Second Port Status	Forwarding
Second Port Direction	Downstream
Trap	Enabled
Master Node	00-00-cd-11-b1-b4

-----------------------------------------------------------