Allied Telesis AT-8900, RAPIER I, X900-48FE Create config, Command Line Interface CLI Enhancements

18 Command Line Interface (CLI) Enhancements Release Note

Command Reference Updates

This section describes each new command and the changed portions of modified commands and output screens. For modified commands and output, new parameters, options and fields are shown in bold.

create config

Syntax CREate CONfig=filename [SET]

Description This command now lets you set the switch to a configuration file when you create it. This command still requires a user with security officer privilege when the router or switch is in security mode.

Parameter	Description
CONfig	Name of the configuration file or script to create. If one already exists,
	it is replaced.
	The filename is in the format [device:]filename.ext and can be:
	• uppercase and lowercase letters
	• digits
	• # $ % & ! ' ( ) + , - . ; = @ [ ] ^ _ ` { } ~ and space
	device indicates the physical location where the file is stored. The
	default is flash.
	.ext is an 3-letter extension, such as .txt or .scp.
	Invalid characters are * “ \ : ? / < >
	Default: no default
SET	Sets the switch to use the configuration file or script specified by
	filename when the switch boots up again.

Example To save the current dynamic configuration to a script file called test.cfg, use the command:

cre con=test.cfg

Software Version 2.8.1 C613-10477-00 REV B