Allied Telesis X900-48FE Show ssh, Software Version 153, SSH Server Enabled SCP Service, Debug

Software Version 2.8.1 153

show ssh

Syntax SHow SSH

Description This command displays the current configuration of the Secure Shell client and server.

Figure 46: Example output from the show ssh command
Secure Shell Server Configuration
-------------------------------------------------------
Version		1.5
SSH Server		Enabled
SCP Service		Enabled
Maximum Sessions		6
Current Sessions		1
Port		22
Host Key ID		0
Host Key Bits		1024
Server Key ID		1
Server Key Bits		768
Server Key Expiry(hours)		0
Login Timeout (secs)		60
Idle Timeout(secs)		Off
Authentication Available		Password,RSA
Ciphers Available		DES,3DES
Services Available		Shell,Cmd,SCP
Debug		ALL
Secure Shell Client Configuration
-------------------------------------------------------
Version		1.5
Login Timeout (secs)		30
Idle Timeout (secs)		Off
Preserve File Modification Time (SCP)....		Enabled
Table 36: Modified parameters in output of the show ssh command
Parameter	Meaning
SSH Server	Whether the Secure Shell server is enabled or disabled.
SCP Service	Whether Secure Copy is enabled or disabled.
Services Available	List of the available Secure Shell services; one or more of
	Shell, Cmd or SCP.
Debug	Whether debugging is active on the server. This can be set
	to debug SSH, SCP, ALL or NONE.
Version	Compatible version of the Secure Shell protocol.
Login Timeout (secs)	Time in seconds that the SSH client will wait to be
	authenticated.
Idle Timeout (secs)	Time in seconds that the SSH client will wait to receive data
	from a SSH server. The client disconnects if this timer limit is
	reached. If the timeout shows Off, the timeout is set to 0
	and never times out, so users must manually disconnect.
Preserve File Modification	Whether a copied file keep the source file’s modification
	time (Enabled), or the modification time is set to the current
Time
	time of copying (Disabled).

Software Version 2.8.1 C613-10477-00 REV B