Allied Telesis AT-8900, RAPIER I, X900-48FE, AT-8700XL Add bgp peertemplate, Disable bgp backoff

106 BGP Enhancements Release Note

add bgp peertemplate

Syntax ADD BGP PEERTemplate=1..30 [CLIEnt={NOYES}] [CONnectretry={DEFault0..4294967295}] [DESCription={NONEdescription}] [HOLdtime={DEFault03..65535}] [INFilter={NONEprefixlist-name}] [INPathfilter={NONE1..99}] [INRoutemap={NONEroutemap}] [KEEpalive={DEFault1..21845}] [LOCal={NONE1..15}] [MAXPREFIX={OFF1..4294967295}] [MAXPREFIXAction={TerminateWarning}] [MINAsoriginated={DEFault0..3600}] [MINRouteadvert={DEFault0..3600}] [NEXthopself={NOYES}] [OUTFilter={NONEprefixlist-name}] [OUTPathfilter={NONE1..99}] [OUTRoutemap={NONEroutemap}] [PRIVateasfilter={NOYES}] [SENdcommunity={NOYES}]

Parameter	Description
DESCription	A description for the peers that use the template, which has no effect
	on their operation. The new none option allows you to not specify a
	description, or remove a previously specified description.
	Default: none.
INRoutemap	The route map that filters and/or modifies prefixes from peers that use
	the template. The new none option allows you to not specify a route
	map, or remove a previously specified route map.
	Default: none
OUTRoutemap	The route map that filters and/or modifies prefixes sent to peers that
	use this template. The new none option allows you to not specify a
	route map, or remove a previously specified route map.
	Default: none

disable bgp backoff

Syntax DISable BGP BACkoff

Description This new command stops BGP backoff. BGP backoff delays BGP processing when the system memory utilisation is high.

BGP backoff is disabled by default, however it automatically enables the first time a peer is added.

Example To disable BGP backoff, use the command:

dis bgp bac

Software Version 2.8.1 C613-10477-00 REV B