Allied Telesis AT-8600 Trap on Vrrp topology changes, Traps on Mstp state and topology changes

Models: AT-9900 AT-8700XL AT-9800 AT-8600 RAPIER I AT-8800 AT-8900 X900-48FE

1 232
Download 232 pages 5.78 Kb
Page 189
Image 189

Software Version 2.8.1

189

ospfNbrAddressLessIndex, the ifIndex of the interface the neighbour is attached to, for addressless interfaces

ospfNbrRtrId, the router ID of the neighbour

ospfNbrState, the new state of the neighbour

The ospfVirtNbrStateChange trap ({ ospfTraps 3 }) is generated when a virtual OSPF neighbour changes state, and contains the following objects:

ospfRouterId, the router ID of the originator of the trap

ospfVirtNbrArea, the transit area identifier

ospfVirtNbrRtrId, the router ID of the virtual neighbour

ospfVirtNbrState, the new state of the virtual neighbour

Trap on VRRP topology changes

RFC 2787, Definitions of Managed Objects for the Virtual Router Redundancy Protocol, defines a portion of the Management Information Base (MIB) for managing the Virtual Router Redundancy Protocol (VRRP).

Objects defined in this MIB reside in the mib(1) subtree and have the object identifier prefix vrrpMIB ({ mib-2 68 }).

This software version implements the following trap from the vrrpNotifications(0) subtree of the VRRP MIB:

The vrrpTrapNewMaster trap ({ vrrpNotifications 1 }) is generated when the sending agent becomes the new VRRP master, and contains the following object:

• vrrpOperMasterIpAddr, the primary IP address of the new master

Traps on MSTP state and topology changes

The IEEE draft ruzin-mstp-mib-04, defines a portion of the Management

Information Base (MIB) for managing Multiple and Rapid Spanning Tree

Protocols.

Objects defined in this MIB reside in the dot1dBridge subtree defined in

RFC 1493, and have the object identifier mstp ({ mib-2 dot1dBridge(17) 11 }).

This software version implements the following traps from the mstpTraps(0) subtree of the MIB:

The mstpNewRootBridge trap ({ mstpTraps 1 }) is generated by a bridge when it is elected as the new root of the Spanning Tree in the CIST or in any MSTI, and contains the following object:

mstpXstId, the MSTI or CIST instance

The mstpNewRootPort trap ({ mstpTraps 2 }) is generated by a bridge when it changes the root port of the Spanning Tree in the CIST or in any MSTI, and contains the following objects:

mstpXstId, the MSTI or CIST instance

mstpXstPortIndex, the index of the port in the mstpPortTable table

The mstpTopologyChange trap ({ mstpTraps 3 }) is generated by a bridge when any of its configured ports in any instance (CIST or MSTI) transitions

Software Version 2.8.1 C613-10477-00 REV B

Page 189
Image 189
Allied Telesis AT-8600 manual Trap on Vrrp topology changes, Traps on Mstp state and topology changes, Software Version 189