Allied Telesis AT-9900, RAPIER I Show ip cache, Internet Protocol IP Enhancements Release Note

76	Internet Protocol (IP) Enhancements		Release Note
		Table 15: Modified parameters on output of the show ip command.
		Arp wait timeout	The amount of time the router or switch waits for a
			response after it sends an ARP request message, in
			seconds.

show ip cache

Syntax SHow IP CAChe

Description This new command displays information about the IP address cache when troubleshooting.

Figure 18: Example output from the show ip cache command

IP Address Cache
------------------------------------------------------------------
Entries	284
Max Entries	284
Last Addition	13:54:43 on Tuesday 21-Feb-2006
Last Rejection	-
Source	Destination	Interface	Type	Age	Count

----------------------------------------------------------------------------

10.1.1.2	192.168.100.3	eth0-1	Forward	1	3
10.1.1.3	192.168.100.3	eth0-2	Forward	1	3
10.1.1.4	192.168.100.3	eth0-3	Forward	1	3
10.1.1.5	192.168.100.3	eth0-4	Forward	1	3
10.1.1.6	192.168.100.3	eth0-5	Forward	1	3
10.1.1.7	192.168.100.3	eth0-6	Forward	1	3
10.1.1.8	192.168.100.3	eth0-7	Forward	1	3
10.1.1.9	192.168.100.3	eth0-8	Forward	1	3
10.1.1.10	192.168.100.3	eth0-9	Forward	1	3
10.1.1.11	192.168.100.3	eth0-10	Forward	1	3

Table 16: Parameters in output of the new show ip cache command

Parameter	Meaning
Entries	Current number of entries in the cache.
Max Entries	Maximum number of entries in the cache since the router
	or switch restarted.
Last Addition	Time and date that the last entry was added to the cache.
Last Rejection	Time and date that an entry failed to be added to the cache
	(possibly because the cache was full).
Source	Source of the IP address.
Destination	Destination of the IP address.
Interface	Interface that the IP packet was received on.

Software Version 2.8.1 C613-10477-00 REV B