Allied Telesis AT-9800 manual Set qos portgroup, Uses Kbps. If you specify Mbps or Gbps, the rate

134	QoS Enhancements			Release Note
		Parameter	Description
		DTCSTORMStatus	Whether storm protection is enabled for the default traffic class.
			Default: disabled
		DTCSTORMWindow	Time between the polling of traffic class counters that checks
			whether storm protection should be activated. Required when storm
			protection is enabled.
			Default: none
			windowsize	Number of milliseconds from 100 to 60 000.
			NONE	Storm protection is inactive.
		DTCSTORMRate	Storm protection is activated when this rate of traffic is exceeded.
			Required when storm protection is enabled.
			If the value of dtcstormwindow is less than one second, the rate is
			averaged over the last second.
			Default: none
			Rate	Bits per second from 1Kbps to 10Gbps, specified in
				Kbps, Mbps or Gbps. If you do not specify a unit, it
				uses Kbps. If you specify Mbps or Gbps, the rate
				may contain a decimal fraction with up to 3 decimal
				places, for example, 1.25 Mbps.
			NONE	Storm protection is inactive.
		DTCSTORMAction	Action QoS takes when a storm is detected on a port.
			Default: portdisable
			LINKDown	Operationally disables ports to which the policy is
				attached.
			POrtdisable	Administratively disables ports to which the policy is
				attached.
		DTCSTORMTimeout	Length of time the port remains disabled after a storm is detected.
			Default: none
			timeoutlength	Duration in seconds from 1 to 86400.
			NONE	The port remains disabled until you enable it again
				with the enable switch port command.

set qos portgroup

Syntax SET QOS PORTGroup=group-list[POLIcy={policy-listNONE}] [DESCription=description]

Description This new command attaches a policy to a port group, or removes the current policy.

Parameter	Description
PORTgroup	Port group affected. The group-listconsists of:
	• one or more port groups
	• a range specified with a hyphen, such as 1-4
	• a comma-separated list of numbers and/or ranges
	• an integer from 1 to 32
	Default: no default

Software Version 2.8.1 C613-10477-00 REV B