Allied Telesis AT-8900, RAPIER I, X900-48FE, AT-8700XL manual Enable ipv6 mld interface, Set ipv6 mld

114 MLD and MLD Snooping Enhancements Release Note

Command Reference Updates

This section describes the changed portions of modified commands and output screens. For modified commands and output, the new parameters, options, and fields are shown in bold.

enable ipv6 mld interface

Syntax ENAble IPV6 MLD INTerface=interface [QUERYversion={12}] [V2Draftcompat={NoYes}]

Description The new v2draftcompat parameter determines the ICMP type of MLDv2 reports. If you specify yes, the interface can process MLDv2 reports that have an ICMP type of 255. This is compatible with early Allied Telesis implementations of MLD. If you specify no, the interface can only process MLD Report messages that have an ICMP type of 143, as specified by

RFC 3810. The default is no.

set ipv6 mld

Syntax SET IPV6 MLD [ROBustness={2..65535DEFault}] [QINterval={1..65535DEFault}] [QRInterval={1..8387DEFault}] [SQInterval={1..65535DEFault}] [SQCount={1..65535DEFault}] [LLQInterval={1..65535DEFault}] [LLQCount={1..65535DEFault}]

Description The maximum qrinterval value is now 8387 seconds. The qrinterval parameter specifies the query response interval in seconds. Responses to queries are spread over this time period. The default is 10.

Software Version 2.8.1 C613-10477-00 REV B