Allied Telesis X900-48FE, RAPIER I MLD Snooping Group Membership Display, Software Version 113

Software Version 2.8.1 113

MLD Snooping Group Membership Display

The command show mldsnooping no longer displays the port members of the All Routers group in the list of ports for groups other than the All Routers group. This change makes the output of this command more like output from the command show igmpsnooping.

To illustrate the change, an example of the previous output is shown in Figure 32 on page 116, and an example of the new output is in Figure 33 on page 116.

Command Changes

The following table summarises the modified command:

CommandChange

show mldsnooping More consistent output

Change of Maximum Query Response Interval for

MLD

This Software Version changes the valid range for the MLD query response interval. The maximum interval is now 8387 seconds, in accordance with RFC 2710.

To set the query response interval, use the command:

set ipv6 mld qrinterval=1..8387

Note that if the router or switch acts as an MLDv1 querier and qrinterval is set to more than 65 seconds, then the Maximum Response Code in MLDv1 query packets will be set to 65535 milliseconds, because this is the highest valid value for that field.

Command Changes

The following table summarises the modified command:

CommandChange

set ipv6 mld Changed range for qrinterval parameter.

Software Version 2.8.1 C613-10477-00 REV B