Allied Telesis AT-9900, RAPIER I, X900-48FE, AT-8900 Set bgp peer, Previously specified description

108 BGP Enhancements Release Note

set bgp peer

Syntax SET BGP PEer=ipadd [AUthentication={MD5NONE}] [CLIEnt={NOYES}] [CONnectretry={DEFault0..4294967295}] [DEFaultoriginate={NOYES}] [DESCription={NONEdescription}] [EHOps={DEFault1..255}] [FASTFallover={NOYES}] [HOLdtime={DEFault03..65535}] [INFilter={NONEprefixlist-name}] [INPathfilter={NONE1..99}] [INRoutemap={NONEroutemap}] [KEEpalive={DEFault1..21845}] [LOCal={NONE1..15}] [MAXPREFIX={OFF1..4294967295}] [MAXPREFIXAction={TerminateWarning}] [MINAsoriginated={DEFault0..3600}] [MINRouteadvert={DEFault0..3600}] [NEXthopself={NOYES}] [OUTFilter={NONEprefixlist-name}] [OUTPathfilter={NONE1..99}] [OUTRoutemap={NONEroutemap}] [PASSword=password] [PRIVateasfilter={NOYES}] [REMoteas=1..65534] [SENdcommunity={NOYES}]

SET BGP PEer=ipadd [POLICYTemplate=1..30] [AUthentication={MD5NONE}] [DEFaultoriginate={NOYES}] [DESCription={NONEdescription}] [EHOps={DEFault1..255}] [FASTFallover={NOYES}] [PASSword=password] [REMoteas=1..65534]

Parameter	Description
DESCription	A description of the peer, which has no effect on its operation. The new
	none option allows you to not specify a description, or remove a
	previously specified description.
	Default: none
INRoutemap	The route map that filters and/or modifies prefixes from this peer. The
	new none option allows you to not specify a route map, or remove a
	previously specified route map.
	Default: none.
OUTRoutemap	The route map that filters and/or modifies prefixes sent to this peer. The
	new none option allows you to not specify an route map, or remove a
	previously specified route map.
	Default: none

Example To remove the outroutemap for a BGP peer whose IP address is 192.168.1.1, use the command:

set bgp pe=192.168.1.1 outr=none

Software Version 2.8.1 C613-10477-00 REV B