Allied Telesis AT-8800, RAPIER I, X900-48FE, AT-8900, AT-8700XL Set ssh client, Software Version 151

Software Version 2.8.1 151

set ssh client

Syntax SET SSH CLIent [IDLEtimeout=0..4294967295] [LOGintimeout=1..600] [PREservemtime={ENAbledDISabled}]

Description This new command modifies the configuration of the Secure Shell client. When the router or switch is in security mode, this command requires a user with Security Officer privilege.

Parameter	Description
IDLEtimeout	The period of time, in seconds, set for the SSH client’s idle timer. If the
	specified time period lapses since the last time an SSH session received
	data from the remote server, the session is terminated. This applies
	from the moment that the SSH session becomes established, regardless
	of whether the user has logged in or not. If the SSH client idle timeout
	period is modified while there are established SSH sessions, the idle
	timers for those sessions are reset so that they use the new timeout
	value. Any idle time accumulated by those sessions prior to the
	modification is lost.
	Default: 0
	0	The idle timer remains off, and the session must be
		terminated by the user.
	1..4294967295 The idle timer is active, and the session terminates
		when the idletimeout limit is reached.
LOGintimeout	The time in seconds that the client waits for the SSH session to
	establish. This cannot be turned off.
	Default: 30
PREservemtime	Whether the SCP client preserves the modification time of the source
	file.
	Default: enabled
	ENAbled	Files copied to and from the router or switch keep
		the same modified time as the source file.
	DISabled	Files copied to and from the router or switch show
		the time of being copied as the modified time.

Example To set the SSH client idle timer to three minutes, and the login timer to 10 seconds, use the command:

set ssh cli idle=180 log=10

Software Version 2.8.1 C613-10477-00 REV B