Allied Telesis AT-8700XL Show qos portgroup counters, Software Version 139, Integer from 1 to

Software Version 2.8.1		139
	Table 33: Parameters in output of the show qos portgroup command
	Parameter	Meaning
	ID/Identifier	Port group ID.
	Description	Description of the port group.
	Policy	Policy attached to the port group.
	Assigned/Policy
	Assigned to
	Ports	Ports that belong to the port group.

Example To display all configured port groups, use the command:

sh qos portg=all

show qos portgroup counters

Syntax SHow QOS PORTGroup[={group-listALL}] COUnters

TRafficclass[={trafficclass-listDEFaultALL}]

Description This new command displays information about traffic class counters for port groups.

Parameter	Meaning
PORTgroup	Specifies a port group for which to display information.
	Default: all
	group-list	Integer from 1 to 32.
	ALL	All port groups.
	no value	Displays summary information about all port groups.
TRafficclass	Traffic class attached to the port group (Figure 42, Table 34).
	Default: all
	trafficclass-listA specific traffic class that consists of:
		• one or more traffic classes
		• a range specified with a hyphen, such as 1-4
		• a comma-separated list of numbers and/or ranges
		• an integer from 0 to 1023
	DEFault	The default traffic class.
	ALL	Displays counters for all traffic classes.

Software Version 2.8.1 C613-10477-00 REV B