Allied Telesis AT-8900, RAPIER I, X900-48FE Disable switch debug, Disable switch filter vlansecure

34	Switching Enhancements		Release Note
		disable switch debug
	Syntax
		DISable SWItch DEBug={ARLDEVDMAPHYALL}
	Description	The m6 parameter is now replaced by the dev parameter in this command.
		Debug Option	Description
		DEV	Debugging occurs on operations related to the switch chip.
		disable switch filter vlansecure
	Syntax
		DISable SWItch FILter VLANSecure
	Description	This new command modifies Layer 2 switch filtering by disabling vlansecure
		mode. The vlansecure mode is enabled by default.
		When vlansecure mode is disabled and a filter exists for a given host and port,
		moving the host to a different port in the same VLAN only stops the host from
		accessing that VLAN, not other VLANs. When vlansecure mode is enabled
		and a filter exists for a given host and port, moving the host to a different port
		blocks the host completely.
	Example	To turn off the default filtering behaviour, use the command:
		dis swi fil vlan
		disable switch port vlan
	Syntax
		DISable SWItch POrt={port-listALL}
		VLAN[={vlan-name1..4094ALL}]

where:

■port-listis a port number, range (specified as n-m), or comma-separated list of numbers and/or ranges. Port numbers start at 1 and end at m, where m is the highest numbered Ethernet switch port, including uplink ports.

■vlan-nameis a unique name from 1 to 32 characters. Valid characters are uppercase and lowercase letters, digits, the underscore, and hyphen.

Description This new command disables one or more ports from VLANs to which they belong. Once disabled, a port remains a member of the VLAN, but does not receive or transmit packets from that VLAN.

The port parameter specifies the port or ports to disable. If a trunked port is specified, all ports in the trunk are disabled. When a VLAN is disabled on a port, ingress filtering is automatically enabled for that port

The vlan parameter specifies the VLAN or VLANs for which ports are disabled. Specified ports must be a member of the VLAN. If no value, or all is specified, the specified ports will be disabled for all VLANs to which they belong.

Software Version 2.8.1 C613-10477-00 REV B