Allied Telesis RAPIER I, AT-8900 Delete ospf redistribute, Disable ospf debug, Enable ospf debug

96 Open Shortest Path First Enhancements Release Note

Adding a BGP, RIP, or static route redistribution definition will change the setting of the bgpimport, rip, and staticexport parameters of the set ospf command on page 97. If you configure a BGP route filter using the bgpfilter parameter of the set ospf command, the filter will be applied before any BGP route redistribution definition.

delete ospf redistribute

Syntax DELete OSPF REDistribute

PROTocol={BGPINTerfaceRIPSTAtic}

Description The modified protocol parameter specifies the route redistribution definition to delete. OSPF no longer imports and redistributes routes from the protocol. Specify bgp or rip to delete the redistribution definition for BGP or RIP routes, respectively. Specify interface to delete the redistribution definition for non-OSPF interface routes. Specify static to delete the redistribution definition for statically configured routes.

Deleting a BGP, RIP, or static interface route redistribution definition will change the setting of the bgpimport, rip, and staticexport parameters of the set ospf command on page 97.

disable ospf debug

Syntax DISable OSPF DEBug={ALLIFSTateNBRSTatePACketREDistributeSPFSTA te}

Description The modified debug parameter specifies the debugging options to disable. If all is specified, all debugging options are disabled. If ifstate is specified, interface state debugging is disabled. If nbrstate is specified, neighbour state debugging is disabled. If packet is specified, OSPF packet debugging is disabled. If redistribute is specified, route redistribution debugging is disabled. If spf is specified, debugging for the Shortest Path First routing calculations are disabled. If state is specified, both interface and neighbour state debugging are disabled.

enable ospf debug

Syntax ENAble OSPF DEBug={ALLIFSTateNBRSTatePACketREDistributeSPFSTA te} [DETail={BRIefHEADerLSAFullLSASummary}] [TIMEOut={NONE1..2400}]

Description The modified debug parameter specifies the debugging options to enable. If all is specified, all debug options are enabled. If ifstate is specified, interface state debugging is enabled. If nbrstate is specified, neighbour state debugging is enabled. Output from ifstate and nbrstate includes the interface or neighbour the state change relates to, the event that caused the state change, and the previous and current states of the interface or neighbour. If packet is specified, OSPF packet debugging is enabled. The level of detail shown in packet

Software Version 2.8.1 C613-10477-00 REV B