Allied Telesis AT-9800, RAPIER I Asynchronous Port Enhancement Release Note, Ten timer value 100

54	Asynchronous Port Enhancement		Release Note
Figure 13: Example output from the show asyn=port-numbercommand
	ASYN 0 : 0003896346 seconds	Last change at: 0000000000 seconds
	ASYN information
	Name	Asyn 0
	Status	enabled
	Mode	Ten
	Data rate	9600
	Parity	none
	Data bits	8
	Stop bits	1
	Test mode	no
	In flow state (mode)	on	(Hardware)
	Out flow state (mode)	off (Hardware)
	Autobaud mode	disabled
	Max tx queue length	16
	TX queue length	3
	Transmit frame	none
	RX queue length	0
	IP address	none
	Max transmission unit	1500
	Ten timer value	100
	.
	.
	.

Table 12: New parameters in the output of the show asyn=port-numbercommand

Parameter	Meaning
Ten timer value	The length of the ten timer, in milliseconds. When an asynchronous port
	is in ten mode, it bundles together the characters that it receives within
	a certain time period, instead of passing them one at a time to a higher
	protocol layer for processing. The ten timer sets the time period over
	which characters are bundled.

Software Version 2.8.1 C613-10477-00 REV B