Allied Telesis AT-8600 Extension to Range of Classifier fields for x900 Switches, Set classifier

Software Version 2.8.1 117

Extension to Range of Classifier fields for x900 Switches

This Software Version introduces the ability to match on more fields of an IPv4 packet. A number of new parameters have been added to Classifier commands to allow this.

Command Changes

The following table summarises the modified commands:

Command	Change
create classifier	New parameters: macsmask, macdmask, tcpflags,
	icmptype, icmpcode, igmptype, eipbyte01 -16.
set classifier	New parameters: macsmask, macdmask, tcpflags,
	icmptype, icmpcode, igmptype, eipbyte01 -16..
show classifier	New input parameters: macsmask, macdmask,
	tcpflags, icmptype, icmpcode, igmptype,
	eipbyte01 -16.
	New output parameters: TCP Flags, ICMP Code,
	ICMP Type, TGMP Type, Layer 3 Byte 01 - 16.

Command Reference Updates

This section describes the changed portions of modified commands and output screens. The new parameters and options are shown in bold for modified commands.

Software Version 2.8.1 C613-10477-00 REV B