Allied Telesis AT-9800, RAPIER I Set loader, Copy is the default method for loading and uploading

150 Secure Copy (SCP) Release Note

set loader

Syntax SET LOAder [ASYn={portDEFault}] [ATTribute={CErtCRlCAcertDEFault}] [BASeobject={dist-nameDEFault}] [DElay={delayDEFault}] [DESTFile=destfilename] [DEStination={BOOTblockCFLASHFLashNVs}] [HTTPproxy={hostnameipaddDEFault}] [METhod={HTTPLDAPSCPTFtpWEBWWWZModemNONE DEFault}] [{KEYid=key-idPASSword=passwordDEFault}] [PROxyport={1..65535DEFault}] [SRCFileFIle=filename] [SErver={hostnameipaddipv6addDEFault}] [SERVPort={1..65535DEFault}] [USERName=username]

Description This command sets defaults for the load and upload commands. All values that can be specified with the load and upload commands can be specified as defaults with the set loader command. Parameters not specified in the load or upload commands use this default.

Parameter	Description
METhod	The method used to download the file. When scp is specified, Secure
	Copy is the default method for loading and uploading.
	Default: tftp
KEYid	The ID number of a RSA private or public key that is held on the router
	or switch. The server receiving the load request must have the public
	key for this authentication to work. The key-idis a decimal number.
	Default: no default
PASSword	The password for server authentication, if RSA authentication is not
	being used. This can be between 1 to 60 characters long. When you
	type the password it appears as plain text on the screen, so it should
	only be used in a secure area.
	Default: no default

Software Version 2.8.1 C613-10477-00 REV B