Allied Telesis AT-8600, RAPIER I, X900-48FE, AT-8900, AT-8700XL Add ip interface, Set igmp filter

Software Version 2.8.1 61

add ip interface

Syntax ADD IP INTerface=interface IPaddress={ipaddDHCP} [ADVertise={YESNO}] [BROadcast={01}] [DIRectedbroadcast={FalseNOOFFONTrueYES}] [FILter={0..999NONE}] [FRAgment={NOOFFONYES}] [GRAtuitousarp={ONOFF}] [GRE={0..100NONE}]

[IGMPProxy={OFFUPstreamDOWNstream}]

[INVersearp={ONOFF}] [MASK=ipadd] [METric=1..16] [MULticast={BOTHNOOFFONRECeiveSENdYES}] [OSPFmetric=1..65534] [POLicyfilter={0..999NONE}] [PREferencelevel={-2147483648..2147483647NOTDEFAULT}] [PRIorityfilter={0..999NONE}] [[PROxyarp={FalseNOOFFONTrueYESSTrictDEFRoute}] [RIPMetric=1..16]

[SAMode={BlockPassthrough}]

[VJC={FalseNOOFFONTrueYES}]

[VLANPRiority={0..7None}] [VLantag={1..4094None}]

where:

■interface is an interface name formed by concatenating a Layer 2 interface type, an interface instance, and optionally a hyphen followed by a logical interface number from 0 to 15. If a logical interface is not specified, 0 is assumed.

■ipadd is an IP address in dotted decimal notation.

Description The new igmpproxy parameter specifies the status of IGMP proxying for the specified interface. If you specify off, the interface does not do IGMP Proxy. If you specify upstream, the interface passes IGMP messages in the upstream direction. A router or switch can have only one interface when the IGMP proxy direction is upstream. If you specify downstream, the interface can receive IGMP messages from the downstream direction. The default is off. To display information about IGMP and multicast group membership for each IP interface, use the show ip igmp command.

set igmp filter

Syntax SET IGMP FILter=filter-idENTry=1..65535 [GROupaddress={ipaddipadd-ipadd}]

[MSGType={QUEryREPortLEAVe}]

[ACtion={INCLudeEXCLude}]

where:

■filter-idis a decimal number from 1 to 99.

■ipadd is an IP address in dotted decimal notation.

Description The new msgtype parameter specifies the type of incoming IGMP message to match. If you specify query, the filter will match IGMP general and group-specific query messages. If you specify report, the filter will match IGMP report messages. If you specify leave, the filter will match IGMP leave messages. The default is report.

Software Version 2.8.1 C613-10477-00 REV B