Allied Telesis AT-8800, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900, AT-8600 Set ip interface

Software Version 2.8.1 63

Example To set the maximum time period allowed between successive IGMP general query messages on interface vlan2 to 120 seconds, use the command:

set ip igmp int=vlan2 query=120

set ip interface

Syntax SET IP INTerface=interface [ADVertise={YESNO}] [PREferencelevel={-2147483648..2147483647NOTDEFAULT}] [BROadcast={01}] [DIRectedbroadcast={FalseNOOFFONTrueYES}] [FILter={0..999NONE}] [FRAgment={NOOFFONYES}] [GRAtuitousarp={ONOFF}] [GRE={0..100NONE}]

[IGMPProxy={OFFUPstreamDOWNstream}]

[INVersearp={ONOFF}] [IPaddress=ipaddDHCP] [MASK=ipadd] [METric=1..16] [MULticast={BOTHOFFONRECeiveSENd}] [OSPFmetric=1..65534DEFAULT] [POLicyfilter={0..999NONE}] [PRIorityfilter={0..999NONE}] [PROxyarp={FalseNOOFFONTrueYESSTrictDEFRoute}] [RIPMetric=1..16] [SAMode={BlockPassthrough}] [VJC={FalseNOOFFONTrueYES}] [VLANPRiority={0..7None}] [VLantag={1..4094None}]

where:

■interface is an interface name formed by concatenating a Layer 2 interface type, an interface instance, and optionally a hyphen followed by a logical interface number from 0 to 15. If a logical interface is not specified, 0 is assumed.

■ipadd is an IP address in dotted decimal notation.

Description The new igmpproxy parameter specifies the status of IGMP proxying for the specified interface. If you specify off, the interface does not do IGMP Proxy. If you specify upstream, the interface passes IGMP messages in the upstream direction. A router or switch can have one interface with the IGMP proxy direction equal to upstream. If you specify downstream, the interface can receive IGMP messages from the downstream direction. The default is off. To display information about IGMP and multicast group membership for each IP interface, use the show ip igmp command.

Software Version 2.8.1 C613-10477-00 REV B