Allied Telesis RAPIER I, AT-8900 Show buffer, Buffer level 1500, Parameter Meaning Buffer level n

192 SNMP MIBs Release Note

Command Reference Updates

This section describes the changed portions of the modified command and output screen. For modified commands and output, the new parameters, options, and fields are shown in bold.

show buffer

Syntax SHow BUFfer [SCAn[=address [QUEuepointers]]]

where address is the memory address of a section of router or switch code expressed in hexadecimal

Description The output of this command includes a new field.

Figure 63: Example output from the show buffer command

Memory ( DRAM )	16384	kB
Free Memory	48 %
Free fast buffers	1799
Total fast buffers	1802
Free buffers	4013
Total buffers	4096
Buffer level 3	125	(don’t process input frames)
Buffer level 2	250	(don’t do monitor or command output)
Buffer level 1	500	(don’t buffer up log messages)
Buffer level 0	1500	(warning via snmp trap)

Table 54: New parameters in output of the show buffer command

Parameter	Meaning
Buffer level n	When the “Free buffers” value drops below this level, the
	specified activity ceases or an SNMP trap is generated.

Software Version 2.8.1 C613-10477-00 REV B