Allied Telesis AT-8900 manual Create qos portgroup, Create qos trafficclass, Protection is enabled

130 QoS Enhancements Release Note

create qos portgroup

Syntax CREate QOS PORTGroup=group-list[POrt=port-list] [DESCription=description]

Description This new command creates a port group so that a policy can be attached to it. A switch instance refers to a single switch chip; port groups cannot span multiple switch instances.

Parameter	Description
PORTgroup	Port group that you want to create. The group-listconsists of:
	• one or more port groups
	• a range specified with a hyphen, such as 1-4
	• a comma-separated list of numbers and/or ranges
	• an integer from 1 to 32
	Default: no default
POrt	Port to add to this port group. The port-listconsists of:
	• one or more ports
	• a range specified with a hyphen, such as 1-4
	• a comma-separated list of numbers and/or ranges
	Default: no default
DESCription	Description of the port group.
	Default: no default

Example To create port group 1, name it “uplink”, and assign port 3 and ports 5 to 10 to uplink, use the command:

cre qos portg=1 po=3,5-10 desc=uplink

create qos trafficclass

Syntax create qos trafficclass=trafficclass-list[stormstatus={enabledisable}] [stormwindow={windowsizenone}][stormrate={ratenone}] [stormaction={linkdownportdisablevlandisable}] [stormtimeout={timeoutlengthnone}]

[other-parameters]

Parameter	Description
STORMStatus	Whether storm protection is enabled for the default traffic class.
	Default: disabled
STORMWindow	Time between the polling of traffic class counters that checks
	whether storm protection should be activated. Required when storm
	protection is enabled.
	Default: none
	windowsize Number of milliseconds from 100 to 60 000.
	NONE	Storm protection is inactive.

Software Version 2.8.1 C613-10477-00 REV B