Allied Telesis AT-9900, RAPIER I manual Show switch filter, Show switch hwfilter, VlanSecure, Mode

44 Switching Enhancements Release Note

show switch filter

Syntax SHow SWItch FILter [POrt={port-listALL}] [ACtion={FORwardDIScard}] [DESTaddress=macadd] [ENTry=entry-list] [VLAN={vlan-name1..4094}]

Description This command displays information about Layer 2 switch filters.

Figure 8: Example output from the show switch filter command

Switch Filters

---------------------------------------------------------------------------

VlanSecure	................	ENABLED
Entry	VLAN	Destination Address	Port Action Source

---------------------------------------------------------------------------

0	default	(1)		aa-ab-cd-00-00-01	1	Forward	static
1	default	(1)		aa-ab-cd-00-00-02	1	Forward	static
0	marketing		(2)	aa-ab-cd-00-00-01	2	Discard	static
1	marketing		(2)	aa-ab-cd-00-00-02	2	Discard	learn

---------------------------------------------------------------------------

Table 7: New parameter in output of the show switch filter command

Parameter	Meaning
VlanSecure	Whether vlansecure mode is ENABLED or DISABLED.
	Standard filtering behaviour is ENABLED.

show switch hwfilter

Syntax SHow SWItch HWFilter [CLASSifier=classifier-list]

Description This command displays information about the configuration of hardware filtering on the router or switch, and a summary of the current filters.

Figure 9: Modified example output from the show switch hwfilter command

Switch Hardware Filter	Summary Information
------------------------------------------------------------
Number of Filters ....	12
Status	ENABLED
Mode	NPSF
Filter	1
Classifier	3
Filter	2
Classifier	100
Filter	3
Classifier	101
------------------------------------------------------------

Software Version 2.8.1 C613-10477-00 REV B