A-18
Cisco Personal Assistant 1.4 Installation and Administration Guide
OL-4590-03
Appendix A Personal Assistant Administration Page Reference
Server Configuration
Media Port Beginning
Address
The start of the range of ports defined in Cisco CallManager that will be used to terminate calls
to Personal Assistant. When Personal Assistant answers a call, it is assigned to an available
port in this range.
The number of telephony ports used is based on the Personal Assistant Number of Telephony
Ports setting.
Number of Media Ports The number of ports available for user calls. The number you select must be based on how you
have installed Personal Assistant, the hardware platform you are using, and whether you are
configuring failover for the server.
For example, if you enter 12, Personal Assistant can handle 12 simultaneous calls with users.
If the server fails, and you have configured a failover server, the failover server must be able
to take on 12 additional ports.
See the “Creating Server Clusters” section on page 1-10 for information about the maximum
available ports for the various hardware platforms and installation configurations.
Interceptor Port Provider The CTI Manager that will provide the JTAPI service required for the Personal Assistant
interceptor ports.
You must select a provider that resides in the same Cisco CallManager cluster in which the
Personal Assistant CTI route points are configured. The provider you select here can be a
different CTI Manager than the one selected for Route Address Provider.
You must first configure a JTAPI provider. See the “Telephony Configuration” section on
page A-26 for more information.
Table A-12 Servers > Server Configuration Page (continued)
Field Description