1
configure 1-87
Telnet Commands
Fabric Parameters There are a number of settings that control the overall behavior and
operation of the fabric. Some of these values, such as the domain, are
assigned automatically by the fabric and may differ from one switch
to another in the fabric. Other parameters, such as the BB-credit, can
be changed for specific applications or operating environments, but
must be in agreement among all switches to allow formation of the
fabric.
The fabric parameters are shown in Table1-3:
End-of-file (control-D)* When entered at a prompt with
no preceding input, terminates
the command and saves changes
made.
* However, on many computers the settings could be different.
Table 1- 3 Configure Command Fabric Parameters
Field Default Range
Domain 11 to 239
BB Credit 16 1 to 16
R_A_TOV 10000 4000 to 120000
E_D_TOV 2000 1000 to 5000
Data Field Size 2112 256 to 2112
Sequence Level Switching 00 or 1
Disable Device Probing 00 or 1
Suppress Class F Traffic 00 or 1
SYNC IO mode 00 or 1
VC Encoded Address Mode 00 or 1
Core Switch PID Format 00 or 1
Per-frame Route Priority 00 or 1
Long Distance Fabric 00 or 1