EMC DS-32B2, ED-12000B

1-286 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual

Telnet Commands

grouplist Specify up to 6 sets of Offset, Mask, and ValueList

separated by a semicolon (;). The entire grouplist

operand must be enclosed in quotation marks. This

operand is required.

The grouplist operand must be specified in the

following format:

"offset, Mask, ValueList; offset, Mask,

ValueList"

For example:

"4, 0xff, 0x22; 12, 0xff, 0x01"

The grouplist component values are as follows:

Offset - Specify the offset within the frame. Offset

0 is the first byte of the SOF, and offset 4 is the first

byte of the frame header. The Offset must be in

decimal format. Valid values for Offset are 0, [4-63].

Offset 0 is a special case which can be used to

monitor the first 4 bytes SOFx frames. EOF can not

be monitored.

Mask - Specify the mask value to be applied

(ANDed) to frame contents.

ValueList - Specify up to four values that need to

be captured from frame contents. The ValueList

can be either hexadecimal or decimal format.

SOFx frames are considered a special case. The

Offset is specified as 0x0, valueList are specified

with:

0 - SOFf

1 - SOFc1

2 - SOFi1

3 - SOFn1

4 - SOFi2

5 - SOFn2

6 - SOFi3

7 - SOFn3