1
diagDisablePost 1-111
Telnet Commands
diagDisablePost
Disable POST execution at reboot.
Syntax diagDisablePost
Availability Admin
Description Use this command to disable power nn self test (POST) execution at
switch reboot. This mode is saved in flash memory and POST
remains disabled until it is enabled using the diagEnablePost
command.
A switch rebooted without POST enabled issues a
DIAG-POSTSKIPPED error message:
0x10fc0c10 (tSwitch): Apr 6 13:24:42
Error DIAG-POST_SKIPPED, 3,
Skipped POST tests: assuming all ports are healthy,
Err# 0004
Operands None
Example To disable the POST during future power ups:
switch:admin> diagDisablePost
Config update Succeeded
Post disable is now 1 (Disabled).
See Also diagHelp
diagEnablePOST