1
switchShow 1-439
Telnet Commands
Operands None
comment The comment field may be blank, or it may display:
◆Disabled — port is disabled
◆Bypassed — port is bypassed (loop only)
◆Loopback — port is in loopback mode
◆E_Port — fabric port, shows WWN and name of
attached switch
◆F_Port — point-to-point port, shows WWN of
attached N_Port
◆G_Port — point-to-point but not yet E_Port or
F_Port
◆L_Port — loop port, shows number of NL_Ports
◆(Trunk master) -—This port is the master port in
a group of trunking ports
◆(Trunk port, master is port #x) —This port is
configured as a trunking port, the master port is
port number x.
◆(upstream) — This E-Port is an upstream path
towards the principal switch of the fabric.
◆(downstream) — This E-Port is a downstream
path away from the principal switch of the
fabric.
◆WWN — This is the WWN of the switch
connected to the E-Port.
◆switch_name —This is the switch name of the
connected switch.