1
snmpMibCapSet 1-409
Telnet Commands
snmpMibCapSet
View and modify options for configuring SNMP MIB/Trap
capability.
Syntax snmpMibCapSet
Availability Admin
Description Use this command to turn on or off certain MIBs and TRAPs. This
command also enables a user to turn on or off group information and
SSN in SW trap messages. It first displays current settings and then
prompts the user to change the values for each parameter.
◆FA-MIB - Specifying yes means the user can access FA MIB
variables with an SNMP manager. The default value is yes.
◆SW-TRAP - Specifying yes means the SNMP management
application can receive SW traps from the switch. The default
value is yes.
◆FA-TRAP - Specifying yes means the SNMP management
application can receive FA traps from the switch. The default
value is yes.
Operands None
Example To view or modify the options for configuring SNMP MIB traps:
switch:admin> snmpmibcapset
The SNMP Mib/Trap Capability has been set to support
FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP
FA-MIB (yes, y, no, n): [yes] y
SW-TRAP (yes, y, no, n): [yes] y
FA-TRAP (yes, y, no, n): [yes] y
SW-EXTTRAP (yes, y, no, n): [no] y
SB5_12000B_0:admin>
See Also agtcfgShow
agtcfgSet
agtcfgDefault