1
portRegTest 1-353
Telnet Commands
Operands This command has the following operands:
Example To run bit write/read test of the ASIC SRAMs and registers:
switch:admin> portRegTest
Running Port Register Test .... passed.
Errors Below are possible error messages if failures are detected:
0x20 BUS_TIMEOUT
0x21 REGERR
0x22 REGERR_UNRST
See Also centralMemoryTest
cmiTest
sramRetentionTest
turboRamTest
camTest
statsTest
filterTest
portLoopbackTest
spinSilk
-ports list Specify a list of ports to test. By default
all of the ports on the current blade will
be tested. This option may be used to
restrict the testing to specific ports.
skiptests masks Specify a bit mask that defines which of
the register test subtests to skip. By
default all subtests will be performed.
Valid mask values include one or more of
the following:
0x2) Skip retry register test .
0x4) Skip statistics register test.
0x8) Skip walk-1 test.
0x10) Skip credit counter test.