EMC DS-32B2, ED-12000B cfgEnable

1-60 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual

Telnet Commands

cfgEnable

Enables a zone configuration.

Syntax cfgEnable cfgName

Availability Admin

Description This command commits the zone configuration in the transaction

buffer to the volatile and nonvolatile memory and enables the

specified zone configuration. This command ends the current zoning

transaction.

The specified zone configuration is built by checking for undefined

zone names, zone alias names, or other inconsistencies; by expanding

zone aliases, removing duplicate entries, and then installing the

effective configuration.

If the build fails, the previous state is preserved (zoning remains

disabled, or the previous effective configuration remains in effect). If

the build succeeds, the new configuration replaces the previous

configuration.

Execute the cfgShow command for a description of defined and

effective configurations.

If a transaction is open on a different switch in the fabric when this

command is run on this switch, the transaction on the other switch is

automatically aborted. A message is displayed on the other switch

notifying the transaction abort.

This command requires a Zoning License.

Operand This command has the following operand:

Example To enable zone configuration USA_cfg:

switch:admin> cfgEnable "TEST_cfg"

zone config "Test_cfg" is in effect