EMC DS-32B2, ED-12000B

1-52 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual

Telnet Commands

c. Check that all ASIC Y has its:

–interrupt bits are set.

–error type is chip number error.

–the port number in error is the receiver port (which is the

base port of asic Y).

d. Reading the error register clears the CMEM interrupt bit;

ready for the next offset to test.

Operands This command has the following operands. If all are omitted, the

default values used are 1 for passCount,QUAD_RAMP for dataType,

and a random value for dataSeed.

Example To test the ASIC central memory:

switch:admin> centralMemoryTest

Running Central Memory Test ... passed.

Test complete: "centralmemorytest" Pass 1 of 1.

Duration 0 hr, 0 min & 19 sec (0:0:19:500)

passed.

passCount Specify the number of test passes to run. By default

the test will be run one time. The passes parameter

may be used to run the specified number of passes.

dataType Specify the type of data pattern to use. By default,

type 9, QUAD_RAMP is used. For a complete list

of supported data patterns run the dataTypeShow

command. Some common settings are:

•1 Byte fill pattern.

•2 Word fill pattern.

•3 Quad fill pattern.

•9 Quad ramp (Addr=Data) pattern.

•11 Random data.

dataSeed Specify the data pattern seed to be used. The

default seed value is 0.