1
qloopAdd 1-377
Telnet Commands
qloopAdd
Add a member to a QuickLoop.
EMC does not support this command.
Syntax qloopAdd "qloopname", "member;member"
Availability Admin
Description Use this command to add one or more members to an existing
QuickLoop.
When a configuration is enabled, all QuickLoops defined in the
configuration must resolve to one or two switch worldwide names.
Zone alias names entered as members of this QuickLoop must be
defined with WWNs. Zone alias names that are defined by domain
and port number, or AL_PA are not accepted as members of the
QuickLoop.
This command requires a Zoning license.
Operands The following operands are required:
Example To add an alias for a second worldwide name to “qlp1”:
switch:admin> qloopAdd "qlp1", "wwn2"
See Also qloopCreate
qloopDelete
qloopRemove
qloopShow
qloopname Specify the name of QuickLoop, in
quotation marks.
member Specify a list of QuickLoop members, in
quotation marks, separated by semicolons.
Include one or more of the following:
◆World Wide Names
◆Zone alias names