1
1-482 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
Specify a QuickLoop AL_PA as a QuickLoop name followed by a list
of AL_PAs, for example "qloop1[01,02]". QuickLoop names have the
same format as zone names, and are created with the qloopCreate
command to define a switch or pair of switches that form the
QuickLoop.
Specify a zone alias name using the same format as a zone name. It is
created with the aliCreate command. The alias must resolve to a list
of one or more of the following:
•For v3.0, a switch domain and physical port number pair.
•For v4.0, a switch domain and port area number pair. View the
area numbers for ports using the switchShow command.
•World Wide Names.
•QuickLoop AL_PAs.
The types of zone members used to define a zone may be mixed. For
example, a zone defined with the following members: "2,12; 2,14’
10:00:00:60:69:00:00:8a" would contain all devices connected to swit ch
2, ports 12 and 14, and to the device with the World Wide Name
"10:00:00:60:69:00:00:8a (either node name or port name), at the port
in the fabric to which it is connected.
Use this command to create a broadcast zone. This is a special zone used to
specify those nodes that can receive broadcast traffic. Broadcas t traffic is
usually meant for servers and not for storage devices. This zone must be
named "broadcast". Only one broadcast zone can exist within a fabric.This
type of zone is hardware enforced; the switch controls data transfer to a port.