1
1-392 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
setesdmode
Enable or disable ESD mode.
Syntax setesdmode [mode | -show]
Availability Admin
Description Use this command to enable or disable ESD mode. The mode is saved
in nonvolatile memory and stays in that mode until the next
execution of setesdmode.
The mode becomes active as soon as this command is executed. It
does not require a reboot to take effect.
When enabled, ESD mode modifies the behavior of the diagnostic test
methods and post scripts. The exact behavior varies, but most
commonly consists of disabling the ports defined with diagsetports
when spinsilk or other functional tests are run for ESD or EMI
testing purposes.
Operands This command has the following operands:
If no operand is specified the current value is displayed.
Example To set ESD mode:
switch:admin> setesdmode
Esd Mode is 0 (Disabled).
switch:admin> setesdmode 1
Config update Succeeded
Esd Mode is now 1 (Enabled).
switch:admin>
See Also spinsilk
mode Specify 1 to enable ESD mode; specify 0 to disable
ESD mode. This operand is optional.
-show Specify this operand to display the current mode
setting. This operand is optional.