EMC DS-32B2, ED-12000B - page 330

1
1-314 EMC Connectrix DS-32B2 and ED-12000B Fabric OS Reference Manual
Telnet Commands
When no operands are specified, the command reports a list of ports
that are disabled from becoming E_Ports.
Example To disable blade 2 port 3 from becoming an E_Port:
switch:admin> portCfgEport 2/3, 0
Committing configuration...done.
switch:admin> portCfgEport
Ports: 0 1 2 3 4 5 6 7
--------------------------------
- - - NO - - - -
See Also portShow
switchShow
portnumber Specify the port number to be configured. Valid
values for port number vary depending on the
switch type. This operand is required.
mode Specify 1 to enable the port to become an E_Port.
This is the default port state. Specify 0 to disable the
port from becoming an E_Port. When the port
operand is present, this operand must also be
present. This operand is required.